How each tool works
One page per tool: what it does, a step-by-step walkthrough on a real Tennessee place (most of them in Cades Cove), how the calculation works, how to read the result, and where it can mislead you. Every tool works from the USGS 3DEP lidar elevation model for Tennessee.
Which tool for which job
Start with the question you have. Each job lists the tools in the order you would use them.
Solar panels and sun
Where will panels, a greenhouse or a deck get the most sun?
Choosing a house site
Where on this property should the house go?
Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
Excavation, driveways and farm roads
How much digging, and can a driveway or farm road make the grade?
Drainage, flooding and wet ground
Where does the water go, and where will it sit?
Farms, ranches, orchards and timber
Which ground suits which use?
Plans, CAD, GIS and 3D printing
I need the terrain as a file.
Property
Property
Click a point
Selects the parcel under your click from the state or county parcel map, or several parcels together, and uses their boundary as the analysis area for every other tool.
Property Report
Select a property, draw a box or polygon, or upload a boundary
Builds a multi-page PDF terrain report for one parcel, several selected together with the Property tool, or an area you draw or upload: hillshade, contours, slope and aspect breakdowns, elevation statistics and a checklist of the official records the report does not replace.
Saved Properties
Select a property, draw a box or polygon, or upload a boundary
Keeps up to 5 places in your browser and compares their elevation, slope, winter sunlight and drainage side by side.
Find Matching Areas
Select a property, draw a box or polygon, or upload a boundary
Combines several tests at once (slope, facing direction, winter sun, wetness and room to build) and highlights only the ground that passes them all, so the next tool can run on just that patch.
Terrain
Contour Lines
Select a property, draw a box or polygon, or upload a boundary
Draws topographic contours at any interval from 1 ft upward across your area and exports them for GIS, CAD, Google Earth, print or laser cutting.
Slope & Aspect
Select a property, draw a box or polygon, or upload a boundary
Maps how steep every part of your area is and which compass direction each face points, with a full breakdown of slope classes and aspect shares.
Sunlight
Select a property, draw a box or polygon, or upload a boundary
Models hours of direct sun across a site on any day of the year, with shadows from the bare-earth terrain up to 1.86 mi away.
Terrain Stats
Select a property, draw a box or polygon, or upload a boundary
Summarizes the minimum, maximum, mean and range of ground elevation across an area, with a chart of how much land sits at each elevation.
Cut & Fill
Select a property, draw a box or polygon, or upload a boundary
Estimates how much earth would be cut and how much filled to level your area to a flat pad, at an elevation you set or at the elevation that balances the two.
Landforms
Select a property, draw a box or polygon, or upload a boundary
Classifies every part of your area into one of ten landforms, such as ridge, spur, slope, hollow and valley, at a scale you choose.
Point Elevation
Click points, or choose an area for a grid
Returns the ground elevation in feet at each point you click, as a numbered list, or on an evenly spaced grid over an area, ready to download as CSV, GeoJSON or DXF.
Water
Water & Drainage
Select a property, draw a box or polygon, or upload a boundary
Maps the overland flow paths across an area, each sized by the acres of land draining through it, and where water would pond once low spots fill, with depth, area and volume.
Wetness Map
Select a property, draw a box or polygon, or upload a boundary
Maps where the shape of the land tends to concentrate moisture, from how much ground drains to each point and how flat that point is.
Catchment
Click an outlet
Maps all the land upstream of a point you click, so you can see where the water arriving at a culvert, a draw or a stream crossing comes from.
Downhill Path
Click a point
Follows rain from any point you click down the ground it would run over, so you can see where water from a house site, a septic drain field or a field ends up.
Views
Viewshed
Click a point
Shows which ground can be seen from a point, out to a radius you pick from 0.5, 1, 2 and 5 miles, for a chosen eye height, with earth curvature and refraction allowed for, on the bare-earth terrain.
Sightline
Tap two points
Checks whether one point is visible from another, and if not, where the view is first blocked and by how much.
Lines
Elevation Profile
Draw or tap out a line
Produces a cross-section of the ground along any line, with distance, total climb and descent, and the gradient at any point on a chart linked to the map.
Measure
Draw or tap out a line, or the corners of an area
Measures the length of a line you tap out on the map, corner by corner, or the area and perimeter of a shape, as flat map measures.
Route Explorer
Tap a start, any stops and a finish
Finds a route from a start to a finish, through any stops you add, that favors gentle grades and stays under a maximum grade you set, offers a smoothed version of it, and shows both on the map and the elevation chart.
Data
Data Here
Click a point
Lists every lidar survey the USGS 3DEP index holds for a spot you click, newest first, with when it was collected, its quality level and whether a lidar DEM is published from it there.
Aerial History
Click a point
Shows the 2021 USGS NAIP aerial photo of a spot you click and swipes it against today’s map. One year for now; more will be added if a state source of older photos is confirmed.
Elevation Change
Select an area up to 1.24 mi across
Compares two USGS lidar surveys of the same ground and maps where it dropped or rose between them, with the volume of ground lost and gained.
Download Data
Select a property, draw a box or polygon, or upload a boundary
Exports the terrain for your area as contour vectors, a GeoTIFF elevation raster, a 3D DXF or LandXML ground surface for CAD and civil design, a georeferenced aerial photo (JPEG, GeoTIFF, KMZ or PNG) or a 3D surface mesh for printing and rendering.
Elevate a File
Upload a file
Adds accurate ground elevation to the coordinates in a GPX, KML, GeoJSON, JSON or CSV file you already have, replacing missing or noisy GPS altitude.
Can’t find what you need? Suggest a feature or ask about custom work.