Property · Select a property, draw a box or polygon, or upload a boundary
Property terrain report for any Tennessee parcel or area
The property terrain report is a multi-page PDF site analysis for one Tennessee parcel, several selected together, or an area you draw or upload on the map, built from the USGS 3DEP lidar elevation model: hillshade, contours, slope and aspect breakdowns, elevation statistics and a checklist of the county, state and federal records it does not replace.
Use it as a terrain check before you buy, or as the first page of a design brief before you pay for a topographic survey. It is ready in minutes and tells you whether the ground is worth that spend.
See what a finished report contains →
Free to run · pay to download
See the full result on the map free, with no account. Download the PDF report and its data bundle of GIS, CAD and 3D files with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months, a one-off payment in US dollars that never renews. Every download on the site is included while the pass lasts.
Who uses this
- Buyers of rural acreage. Compare the terrain on every parcel on the shortlist before paying for inspections on one.
- Architects and designers. Get the ground shape, slope classes and aspect at the start of a project.
- Real estate agents and sellers. Answer the slope and drainage questions buyers ask.
When to use it
- You want something to send to a client, a builder or a family member rather than a screen.
- You are shortlisting rural acreage and want the same terrain summary for each parcel.
- You need a record of what the ground looked like when the lidar was flown.
Tools for your job
Property Report is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
- 1.Property — Selects the parcel from the statewide appraisal-district map so every other tool is clipped to the boundary.
- 2.Property Report (this tool) — A PDF with contours, slope, aspect, winter sun, drainage and elevation for that parcel, or several selected together.
- 3.Saved Properties — Up to 5 places side by side: elevation, slope, winter sun and drainage.
- 4.Water & Drainage — Terrain flow paths and potential ponding; rainfall and flood extent are not modeled.
- 5.Aerial History — Historical aerial photos of the spot, swiped against today: old roads, buildings and clearings.
How to use it
- Open Property Report and click inside the parcel, or search its address first. To report on part of a parcel, several parcels or land the parcel map misses, draw a box or polygon or upload a boundary instead.
- Wait for the preview. Larger parcels take longer because more terrain is loaded.
- Choose Download report for the PDF, or open Data bundle (ZIP) and tick what it should hold, from the outline of a drawn area or box as GeoJSON and KML (never a parcel boundary), the elevation model as a GeoTIFF, the contours as GeoJSON, KML, Shapefile and DXF, a 3D terrain model as STL, a slope map, flow paths and a wetness map, a USGS NAIP aerial photo, and the terrain surface as LandXML and 3D DXF, with a README and manifest that name each file’s coordinate system. The panel shows each part’s detail and an estimated size first.
Step by step: a parcel on Cherokee Orchard Road in Gatlinburg
We build the full terrain report for the same Gatlinburg parcel.
1.Open Property Report and click inside the parcel, or search its address. The panel confirms the parcel and its area before anything is built.
2.Build report (PDF) draws the maps in your browser and has this site’s server assemble the PDF. The cover shows the parcel and four key figures: area, elevation range, mean slope and winter sun.
3.The slope page gives the mean slope and the share of the parcel in each slope class.
4.The winter sun page maps hours of direct sun on December 21 across the parcel, with the times of first and last sun.
What it showed
- Page 2 sums the report up in a few findings. The other pages cover contours, aspect, drainage, hillshade and elevation statistics, and the report closes with the county, state and federal records it does not replace, and where to check each one.
- The data bundle (ZIP) gives you the underlying files for GIS and CAD, the parts you tick from the outline of a drawn area or box as GeoJSON and KML (never a parcel boundary), the elevation model as a GeoTIFF, the contours as GeoJSON, KML, Shapefile and DXF, a 3D terrain model as STL, a slope map, flow paths and a wetness map, a USGS NAIP aerial photo, and the terrain surface as LandXML and 3D DXF, with a README and manifest that name each file’s coordinate system.
How it works
The parcel boundary is fetched from the state or county parcel service (or your drawn or uploaded area is used as the boundary) and the USGS 3DEP elevation model is loaded for its extent. Contours, slope, aspect and elevation statistics are computed on that terrain and clipped to the boundary.
The maps are drawn in your browser and sent to this site’s server, which assembles the pages into a PDF, with the data sources named on the attribution page.
The closing checklist lists the records a terrain report cannot stand in for: county assessor of property and register of deeds records, city or county planning and zoning, FEMA flood maps, geology, water wells, septic (subsurface sewage disposal), wildfire risk, wetlands and title records. The report links only to verified public pages; an agency can be named without a link.
Reading the results
Slope classes are given as shares of the parcel. Read the distribution alongside the map: a parcel average can conceal a steep access route or a narrow bench. The bands do not establish buildability, permit requirements or soil stability.
Aspect is where each face points. In Tennessee, south-facing ground gets the most winter sun.
Elevations are in feet above NAVD 88, the national vertical datum, which is close to mean sea level.
Limits and caveats
- A terrain report is not a survey, a geotechnical report or a planning review. It shows the ground shape on the date the lidar was flown.
- Outside the finest lidar work units, 3DEP can use older lidar at about 9.8 ft per pixel or a coarser model at about 33 ft per pixel. Fine output spacing cannot recover missing source detail. Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
- Parcels and drawn areas larger than the area limit are refused. Draw a smaller area instead.
- A drawn area is not a property record: the report names the county at its center and does not follow any parcel line.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Tennessee, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Tennessee parcel boundaries come from the county assessors of property, through the Comptroller’s Division of Property Assessments and county GIS offices, and are not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Is this a substitute for a topographic survey?
No. It shows the ground as the lidar recorded it, which is good enough to decide whether a site is worth pursuing and to start concept design. Permit drawings, boundary work and engineering design still need a licensed surveyor and, on steep or unstable ground, a geotechnical engineer.
What is in the data bundle?
A ZIP of the underlying files for the parcel or area, the parts you choose from the outline of a drawn area or box as GeoJSON and KML (never a parcel boundary), the elevation model as a GeoTIFF, the contours as GeoJSON, KML, Shapefile and DXF, a 3D terrain model as STL, a slope map, flow paths and a wetness map, a USGS NAIP aerial photo, and the terrain surface as LandXML and 3D DXF, with a README and manifest that name each file’s coordinate system, so a designer can take the site straight into GIS or CAD. The PDF report is a separate download.
Can I see the report before paying?
Yes. The preview is built on screen for free. Downloading the PDF or the bundle needs a pass.
What does the checklist cover?
The records a terrain report cannot stand in for: the county assessor of property’s records (and the Comptroller’s TPAD site), deeds at the county register of deeds, city or county planning and zoning, FEMA flood maps, water wells through TDEC’s Division of Water Resources, septic (subsurface sewage disposal) permits through TDEC’s Ground Water Protection program or the county health department, geology from the Tennessee Geological Survey, wildfire risk from the Tennessee Division of Forestry, the USFWS National Wetlands Inventory and a preliminary title report, each with the agency that holds it and a link where one has been checked.
Ready to try it?
Open Property Report on the map →Free to use, no account. The maps are drawn in your browser and the PDF is assembled on this site’s server from public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.