Property · Select a property, draw a box or polygon, or upload a boundary
Compare the terrain of up to 5 Tennessee properties
Compare properties side by side on the numbers that decide whether a parcel works: elevation range, slope classes, modeled winter sun and a drainage indicator. Save up to 5 places and the table fills in as each one is analyzed.
The shortlist is kept in your browser, with notes per property, and exports as a file you can share with a partner or a builder.
Free to run · pay to download
Free to run, and free to save as a PNG image of the map. This tool has no file export of its own. For the terrain as a file, Download Data exports contours, a GeoTIFF or a 3D mesh with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months.
Who uses this
- Buyers of rural acreage. Rank a shortlist on terrain before driving out to see any of them.
- Buyer’s agents. Give clients a like-for-like terrain table.
When to use it
- You are choosing between several parcels and want the terrain numbers in one table.
- You want to come back to a shortlist later without selecting each parcel again.
Tools for your job
Saved Properties is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
- 1.Property — Selects the parcel from the statewide appraisal-district map so every other tool is clipped to the boundary.
- 2.Property Report — A PDF with contours, slope, aspect, winter sun, drainage and elevation for that parcel, or several selected together.
- 3.Saved Properties (this tool) — Up to 5 places side by side: elevation, slope, winter sun and drainage.
- 4.Water & Drainage — Terrain flow paths and potential ponding; rainfall and flood extent are not modeled.
- 5.Aerial History — Historical aerial photos of the spot, swiped against today: old roads, buildings and clearings.
How to use it
- Select a parcel, or draw or upload a boundary.
- Choose Analyze and save property. The terrain is sampled and the snapshot is stored.
- Repeat for up to 5 places. The table updates as each one finishes.
- Add notes per property, and export the shortlist as a JSON file to keep or share.
Step by step: a parcel on Cherokee Orchard Road in Gatlinburg
We save the Gatlinburg parcel and a second place, a downtown lot in Cookeville, and compare the two.
1.Select a parcel (or an area), give it a name and choose Analyze and save property. Elevation, slope, winter sun and drainage are computed and stored in your browser.
2.After the second save the table fills in the elevation range, mean slope and winter sun hours for both.
What it showed
- Mountain land and a city lot differ in slope, sun and drainage; the table puts the differences in numbers instead of impressions.
- The list stays in this browser. Export comparison saves it as a file you can keep or send.
How it works
For each saved boundary the tool loads the terrain and computes the mean and range of elevation, slope classes, modeled hours of direct sun on the shortest day (December 21) and a drainage indicator from flow accumulation, then stores the results with the boundary.
Everything lives in your browser’s local storage. Nothing is sent to a server or tied to an account, which is also why the list is per device.
Reading the results
Compare like with like: a 10-acre parcel and a 100-acre parcel will differ in elevation range simply because of size.
Winter sun hours are modeled on bare ground for December 21 and ignore trees and buildings.
Limits and caveats
- Five snapshots per browser. Saving the same boundary again replaces its snapshot.
- Clearing site data in the browser removes the list. Export the JSON first if you want to keep it.
- Outside the finest lidar work units, 3DEP can use older lidar at about 9.8 ft per pixel or a coarser model at about 33 ft per pixel. Fine output spacing cannot recover missing source detail. Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Tennessee, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Tennessee parcel boundaries come from the county assessors of property, through the Comptroller’s Division of Property Assessments and county GIS offices, and are not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Where is my shortlist stored?
In your browser only. Nothing is sent to a server and there is no account, so the list is per device. Export it to keep a copy.
Ready to try it?
Open Saved Properties on the map →Free to use, no account. The analysis runs in your browser on public-domain USGS 3DEP data. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.