Property · Click a point
Select a Tennessee property boundary for terrain analysis
This Tennessee property boundary map loads the parcel under your click from the Tennessee Comptroller’s parcel layer, or from the county’s own map in Davidson, Hamilton, Hickman, Montgomery, Rutherford and Williamson counties, and uses it as the analysis area for every other tool. Contours, slope, drainage, winter sun and the property report are then clipped to the parcel rather than a rectangle drawn by eye.
It is the starting point for most jobs on this site: find the place by address or name, select the parcel, then pick the question you want answered. The parcel maps come from the county assessors of property, through the Comptroller’s Division of Property Assessments or the county’s GIS office. Knox, Shelby and Chester counties have no parcel layer on this site, so draw the area there instead. Local gaps, outdated geometry and missing identifiers can occur; the panel reports when no usable parcel is found.
Free to run · pay to download
Free to run, and free to save as a PNG image of the map. This tool has no file export of its own. For the terrain as a file, Download Data exports contours, a GeoTIFF or a 3D mesh with a pass: US$29 for 24 hours, US$99 for 30 days or US$399 for 12 months.
Who uses this
- Buyers. Measure the parcel they are actually buying, not the pasture next door.
- Architects and designers. Start a site analysis from the parcel boundary and parcel ID.
- Real estate agents. Pull terrain facts for a listing in a couple of clicks.
When to use it
- You want contours, slope, sunlight or drainage clipped to a parcel rather than a rectangle drawn by eye.
- You are comparing several properties and want each one measured on the same footing.
- You need the parcel ID, county and acreage alongside the terrain.
Tools for your job
Property is one step in a bigger question. These are the jobs it helps with, and the tools that go with it.
For the job: Buying a lot or rural acreage
What is the ground like, and how does it compare with the others on my list?
- 1.Property (this tool) — Selects the parcel from the statewide appraisal-district map so every other tool is clipped to the boundary.
- 2.Property Report — A PDF with contours, slope, aspect, winter sun, drainage and elevation for that parcel, or several selected together.
- 3.Saved Properties — Up to 5 places side by side: elevation, slope, winter sun and drainage.
- 4.Water & Drainage — Terrain flow paths and potential ponding; rainfall and flood extent are not modeled.
- 5.Aerial History — Historical aerial photos of the spot, swiped against today: old roads, buildings and clearings.
How to use it
- Open Property and zoom in until parcel lines appear on the map. Lines are drawn in the 86 counties on the state layer; in Davidson, Hamilton, Hickman, Montgomery, Rutherford and Williamson counties, click anyway and the county’s own parcel is fetched.
- Click inside the parcel. The boundary is fetched and drawn as the analysis area.
- Search an address or place name in the top bar to jump to the area instead of panning.
- To take several parcels, Shift-click each one (Ctrl-click also works, or ⌘-click on a Mac), or turn on Add another parcel (handy on a phone). Click a selected parcel again to drop it. Select parcels in a box takes every parcel a box up to 1.2 miles across touches, roads, railroads and water left out. Up to 25 parcels at once, from any counties.
- Switch to any area tool. Its results are clipped to the parcel until you clear or redraw the area.
Step by step: a parcel on Cherokee Orchard Road in Gatlinburg
We select a parcel on Cherokee Orchard Road in Gatlinburg, in Sevier County, so the other tools measure only inside the parcel.
1.Open Property from the tool rail and zoom in until the parcel lines show. The panel asks for a click.
2.One click inside the parcel fetches the boundary from the state parcel layer, with the parcel ID, county and acreage in the panel. The outline is now the analysis area for every other tool.
What it showed
- The boundary follows the county assessor’s parcel map, including corners you would never draw by eye. It is a GIS map, not a survey.
- Switch to Slope & Aspect, Sunlight or Water & Drainage. Each is clipped to this outline until you clear it.
How it works
The click is sent through this site’s server to the Tennessee Comptroller of the Treasury’s parcel layer (Division of Property Assessments, published through TNMap), which covers 86 counties, or, in the six counties outside it that publish their own, to the county’s parcel layer. The returned parcel polygon supplies its parcel ID as the county writes it, its county and, where the layer has them, the site address and acreage; owner and value details are never requested. Knox, Shelby and Chester counties have no layer this site can use.
The polygon becomes a cookie cutter: terrain is loaded for its bounding box, and every tool masks its result to the polygon so nothing outside the boundary is counted.
Several parcels are merged into one area: neighbors join up and separate parcels stay separate, so tools measure all of them and nothing in between. Files from the Download tool still cover one rectangle around them all.
Reading the results
The panel shows the parcel ID, the county, the site address where the county’s layer publishes one, and the acreage measured from the outline. With several parcels it lists each one with its area and county, and the total.
Downloads from the other tools carry the parcel in their metadata. Parcel boundaries themselves are never put into a download file: no permission to redistribute the state or county parcel data has been confirmed.
Limits and caveats
- Parcel lines are the county assessors’ maps, drawn for property tax, not surveys. They can differ from fences, corners and recorded surveys on the ground. For a boundary question or a setback, hire a licensed land surveyor.
- Parcels cover 92 of Tennessee’s 95 counties: Knox, Shelby and Chester counties have no layer here, so draw or upload the boundary there. Elsewhere local gaps, outdated boundaries and missing identifiers can occur; if no usable parcel is returned, draw or upload the boundary instead.
- Very large rural parcels may exceed a tool’s area limit. The tool will say so; draw a smaller area inside the parcel instead.
- The parcel services are live external dependencies. If it is down, no boundary is selected and a notice asks you to try again.
Data and attribution
Results come from the USGS 3D Elevation Program (3DEP) bare-earth elevation model: lidar at 3.3 ft per pixel where it has been flown, with older lidar at about 9.8 ft per pixel and coarser sources at about 33 ft per pixel elsewhere, with elevations above NAVD 88. Every tool is bare earth: trees and buildings are not in the elevation model for Tennessee, so Sunlight, Viewshed and Sightline work from the terrain alone.
USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Tennessee parcel boundaries come from the county assessors of property, through the Comptroller’s Division of Property Assessments and county GIS offices, and are not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.
Questions
Are parcel lines survey accurate?
No. Parcel maps are drawn for the county assessors of property, for assessment and tax records, and the lines can differ from fences, corners and recorded surveys on the ground. For a boundary question or a setback, hire a licensed land surveyor.
Can I search by address?
Yes. The search bar takes a street address or a place name anywhere in Tennessee and jumps there; then click the parcel. Searching by parcel ID is not available yet.
Can I select more than one parcel?
Yes, up to 25. Shift-click each parcel, turn on Add another parcel, or select every parcel in a box. The tools then analyze them together as one area, and one report can cover them all.
Why does no parcel come up where I click?
The state layer covers 86 of Tennessee’s 95 counties and six more counties publish their own; Knox, Shelby and Chester have no layer this site can use. Each map comes from the county’s own records, so a parcel can be missing, outdated or drawn differently from the ground. A click on a road can also land between parcels. You can still draw the area by hand or upload a boundary file and use every tool.
Ready to try it?
Open Property on the map →Free to use, no account. The parcel is looked up in the Tennessee Comptroller’s state parcel layer, or the county’s own layer, through this site’s server. Downloading the results needs a pass: see pricing.
Missing something you need? Suggest a feature or ask about custom work.