Lidar Coverage in Tennessee

Is your place covered by lidar, which project flew it, and how dense is the data? Search an address and see the lidar behind the USGS 3DEP elevation model at that point.

Check lidar coverage

Search any Tennessee town, street address or landmark. The answer comes from the USGS 3DEP index of qualifying fine-resolution work units. Older lidar or coarser terrain data can exist outside those footprints.

Coverage is a question with three parts

“Is there lidar here?” sounds like a yes or no, but the answer that actually helps has three parts.

  1. Has the area been flown at all? Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown.
  2. When was it flown? This decides whether you can rely on the data for a decision. An elevation model shows the ground on the day it was flown, and the ground changes with grading, building, logging and landslides.
  3. How dense is the data? Point density varies from project to project. More pulses per square foot means more reliable detail, especially under forest.

The search above answers all three for a single point.

How Tennessee was flown

Project by project

Tennessee's lidar was flown one project at a time, each over its own block of the state, and each project has its own specifications. The USGS 3DEP index records the work units, with details such as year, quality level and point density where they are known, and those are the figures the checker shows. Around Nashville, for example, the index lists two work units, TN_Eastern_2_16_B16_Del1_2016 (quality level 2) and TN_DavidsonCo_1_2022 (quality level 1). For Tennessee there is also the Tennessee Elevation/LiDAR Program site.

More than one project for a place

The index can list more than one lidar work unit for the same point, so the checker may show several, each with its own year. The checker marks the newest qualifying one; the seamless model does not always say which source it used.

One seamless model

Ground elevations come from the USGS 3D Elevation Program (3DEP) seamless bare-earth model, with elevations above NAVD 88. Source cells are 3.3 ft per pixel in the finest work units, with about 9.8 ft per pixel and 33 ft per pixel sources elsewhere. USGS elevation data is public domain. Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. The 3DEP index records which work unit covers each place, and that is what the checker reads. More from the USGS 3D Elevation Program and Tennessee elevation and lidar resources.

When the data is old or coarse

Coverage decides how much you can read into a result:

  • Fine contours need lidar. An interval of 1 or 2 ft only means something where the model rests on lidar.
  • Slope on gentle ground is sensitive. On a nearly flat field on the Mississippi River lowlands or the loess plains of West Tennessee, the noise in a coarse model can be larger than the slope itself.
  • House sites, drainage and earthwork need detail. A foot or two matters, and that takes good lidar.
  • Recent changes do not show. If a lot was graded, filled or built on after the flight, the model shows the ground as it was before.

Bare earth or surface model — which do you need?

ProductWhat it showsUse it for
Bare earth (USGS 3DEP)The ground, with trees and buildings removedContours, slope, drainage, cut and fill, flow paths — every tool on this site
Surface model (DSM)The top of everything: tree crowns, roofs, power linesNot used here; no tool on this site reads one

Every tool here reads the bare-earth model, because the questions they answer are about the ground. This site has no surface model of trees and buildings, so Sunlight, Viewshed and Sightline model terrain shadows and lines of sight over the bare ground only.

Where the data lives

Read more in the guides to free elevation data and to downloading DEM data.

Working with coverage in this tool

Every result on this site reads the USGS 3DEP seamless model, which uses lidar at 3.3 ft per pixel where a work unit meets the USGS standard for its finest DEM and drops to coarser data, down to about 33 ft per pixel, only where it has to. The two can meet inside one area you select, so every file from Download Data states what share of its area fell outside full-resolution lidar, and you always know which data a number rests on.

Found lidar over your place?

Draw an area and get contours, slope, drainage or a full property report from the same data. No account and nothing to install.

Frequently asked questions

How much of Tennessee has lidar coverage?

Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Tennessee’s lidar was flown project by project, each over its own block of the state. The fastest way to know about a specific place is to check it in the search at the top of this page.

How do I find out when the lidar over my property was flown?

Search your address above. The checker reports whether the point sits inside a USGS 3DEP lidar work unit and lists the work units the USGS index records there, with the year, quality level, cell size, point density and reported vertical accuracy where the index records them, plus a link to the project metadata when there is one.

Why does the flight year matter?

An elevation model is a snapshot of the ground on the day it was flown. Grading, new roads, fill, logging, landslides and rivers that move all change the ground afterward. A survey flown before a lot was graded will not show the grading. When you plan, apply for a building permit or estimate earthwork, the flight year tells you how far you can trust the contours.

What does point density mean?

Point density is how many laser pulses were recorded per square foot of ground. Denser data gives more ground hits under forest and brush and sharper detail in ditches, terraces and banks. Both dense and sparse projects can produce the same bare-earth grid, but the dense one is more reliable in the details, especially under thick trees such as the hardwood forests of the Great Smoky Mountains.

What happens where there is no lidar work unit?

The USGS 3DEP elevation model is seamless: where no lidar work unit meets the USGS standard for its finest DEM, it falls back to coarser data, down to 1/3 arc-second, about 33 ft per pixel. That is fine for a picture of the landscape and not for detail that turns on a foot or two — fine contour intervals, slope on gentle ground or siting a house. Every file from Download Data states what share of its area came from the fallback.

What is the difference between bare earth and a surface model?

The bare-earth model (DEM or DTM) is the ground with trees and buildings removed. A surface model (DSM) is the top of everything: tree crowns, roofs and power lines. Use bare earth for contours, drainage and earthwork. This site has no surface model, so every tool on it is bare earth: it reads the USGS 3DEP model and nothing else.

Is the data free to use, and who do I credit?

USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Tennessee parcel boundaries come from the county assessors of property, through the Comptroller’s Division of Property Assessments and county GIS offices, and are not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.

Related guides