Free Elevation Data for Tennessee

Tennessee's elevation data is public: lidar flown across the state and assembled by the USGS into a seamless model anyone can download. Here is where it lives, what you may do with it, and where the real cost actually sits.

What is free

Ground elevations come from the USGS 3D Elevation Program (3DEP) seamless bare-earth model, with elevations above NAVD 88. Source cells are 3.3 ft per pixel in the finest work units, with about 9.8 ft per pixel and 33 ft per pixel sources elsewhere. USGS elevation data is public domain. Lidar coverage and source dates vary across Tennessee. Check your site against the USGS 3DEP work-unit index; an unavailable lookup means coverage is unknown. Being in the public domain means no fee, no account and no restriction on commercial use. Data from other sites comes with its own terms. More from the USGS 3D Elevation Program and Tennessee elevation and lidar resources.

DatasetResolutionWhat it is good for
USGS 3DEP seamless DEM3.3 ft per pixel where lidar meets the USGS standard for its finest DEM, coarser (up to about 33 ft per pixel) elsewhereBare-earth ground. Fine contours, slope, drainage, cut and fill, building pads — anything where a foot or two matters.
Tennessee Elevation/LiDAR ProgramVaries by projectTennessee's elevation and lidar program site. Check each dataset's date, units and terms.
Lidar point clouds (LAS/LAZ)varies by projectThe raw lidar returns before gridding, for custom classification and forestry work.
USGS topographic mapsone fixed contour interval per sheetThe published map series, with names, roads and trails, as printable sheets.
Basemap and hillshade tilesn/aPre-rendered topographic and relief tiles to put behind a web map.

Where to get it

The same underlying data is published several ways for different needs. Picking the wrong one is the most common way to lose an afternoon.

Check what exists over your area first

Lidar projects differ in age and point density from one valley to the next. Search an address before you commit to a download.

Check lidar coverage →

What public domain actually allows

Public domain is as permissive as it gets, and people routinely assume it is more restrictive than it is. With USGS 3DEP data you may:

  • use it commercially, including in paid client work;
  • redistribute it, in whole or in part;
  • create and sell derived works — contour plans, maps, models, reports;
  • modify, reproject, resample and combine it with other data.

A credit to the USGS 3D Elevation Program is appreciated. Data from other sites carries its own terms and credit. Every file from Download Data carries the USGS credit for you.

USGS NAIP aerial photography is public domain too. The Download Data tool delivers it as a georeferenced color photo of your area, about 1 ft per pixel where available, with a world file for GIS and CAD.

Free data is not the same as a free answer

This is the part worth being straight about. The data costs nothing. Turning it into something you can act on costs time, whichever route you take.

Say you want 1-ft contours over one acreage near Franklin. Working from raw data, that means finding the tiles that cover the parcel, downloading and merging them, reprojecting, converting between metric and US units where sources differ, clipping to the parcel, generating contours, tidying the artifacts around water and missing data, and exporting to DXF for whoever asked. QGIS does all of it, and QGIS is free. It is still an afternoon the first time.

Every tool built on this data, including this one, exists to remove that afternoon. Know that this is the choice you are making, rather than assuming a paid tool has better data: in Tennessee everybody is reading the same public elevation model.

Doing it yourself in QGIS

If you would rather own the workflow, the short version:

  1. Install QGIS. It is free, open source and the standard tool for this.
  2. Find your tiles in The National Map Downloader, or request a GeoTIFF of exactly your area from the 3DEP elevation image service.
  3. Mind the units and projections. USGS publishes 3DEP elevations in meters; Tennessee CAD and survey work is usually in Tennessee State Plane, a single zone for the whole state, in US survey feet. Mixing them silently is the most common source of a result that looks almost right.
  4. Clip to your area before processing, not after. Contouring a whole county to keep one field is how an afternoon becomes a day.
  5. Use Raster → Extraction → Contour for contours, and the GDAL DEM tools for slope, aspect and hillshade.

The guide to downloading DEM data goes through this in more detail, including what DEM, DSM and DTM mean and which one you want.

Data sources and further reading

Everything described on this page comes from these sources. All of them are public and free to use.

Primary sources

  • USGS 3D Elevation Program (3DEP) seamless DEM — The bare-earth source for terrain tiles, contours, profiles, statistics, downloads and elevation added to files. Source resolution varies: 3.3 ft per pixel in the finest work units, with older lidar and coarser seamless data elsewhere. Elevations are above NAVD 88. Public domain. Selecting a fine output grid cannot create detail missing from the source.
  • Tennessee Elevation/LiDAR Program — The state’s lidar program and downloads for Tennessee. This site uses the USGS 3DEP index for work-unit coverage and available project metadata; it does not infer an acquisition date or accuracy for all of Tennessee from one project.
  • Tennessee Comptroller of the Treasury, Division of Property Assessments: parcel data — Parcel boundaries for 86 of Tennessee’s 95 counties, published through TNMap; the Property tool queries that public layer, and six counties’ own layers (Davidson, Hamilton, Hickman, Montgomery, Rutherford and Williamson). Knox, Shelby and Chester counties have no parcel layer on this site: draw the area there instead. Local gaps, outdated boundaries and missing parcel IDs can occur; no parcel found is not proof that land is unowned. Parcel maps are not legal surveys.
  • USGS Geographic Names Information System (GNIS) — Tennessee place names for search, including towns, peaks, lakes, streams and other named features.
  • Basemaps — USGS Topo and Esri World Imagery — USGS Topo, shaded relief rendered from 3DEP, and Esri World Imagery (Imagery: Esri, Maxar, Earthstar Geographics, and the GIS User Community) provide map context. The aerial basemap is display-only. Downloadable aerial photos come from public-domain USGS NAIP imagery.

Search, basemaps and terms

Related guides

Frequently asked questions

Is elevation data free in Tennessee?

Yes. The USGS 3D Elevation Program publishes a seamless bare-earth elevation model — 3.3 ft per pixel where lidar meets the USGS standard for its finest DEM, coarser elsewhere — as a U.S. Government work in the public domain. There is no charge to download it. The Tennessee Elevation/LiDAR Program site is another place to look; check the terms of anything you take from it.

Can I use free elevation data commercially?

USGS 3DEP elevation data and USGS maps are U.S. Government works in the public domain: you may use the results, including commercially. A credit to the USGS 3D Elevation Program is appreciated, and every file you download carries it. Tennessee parcel boundaries come from the county assessors of property, through the Comptroller’s Division of Property Assessments and county GIS offices, and are not legal surveys; the parcel disclaimer accompanies the selection. The Esri aerial basemap follows Esri’s terms and is display-only; downloadable aerial photos use USGS NAIP.

What is the catch with free elevation data?

The data is genuinely free and genuinely good. The cost is in using it. Turning raw tiles into a contour map means finding the right tiles, merging them, reprojecting, converting between metric and US units where sources differ, clipping to your area, generating contours at your interval and exporting to a format your software reads. That is an afternoon in QGIS the first time. Tools built on this data charge for that work, not for the data.

Where can I download free DEM data for Tennessee?

The National Map Downloader from USGS is the main route for 3DEP elevation tiles and lidar point clouds. There is also the Tennessee Elevation/LiDAR Program site, and the State of Tennessee publishes downloadable GIS data at geodata.tn.gov. The 3DEP elevation image service can also export a GeoTIFF of any area directly, which is what this site reads.

How accurate is the free data?

Accuracy depends on the source project, its date and how well ground was measured; this site does not assign one accuracy figure to all of Tennessee. Source cells range from 3.3 ft per pixel in the finest work units to about 9.8 ft per pixel or 33 ft per pixel in coarser sources. Every download reports the share outside the finest lidar work units, or says coverage is unknown if the index cannot be reached. Bare-earth elevations exclude buildings and tree canopy and do not replace a surveyed elevation for legal or engineering decisions.

Do I need GIS software to use free elevation data?

To work with the raw files, yes — QGIS is free and capable. To get a result rather than a file, no. Tennessee Elevation Tools reads the same public data and returns contours, slope, drainage, profiles and property reports in the browser.